Just $125.00 more to qualify for free shipping of $125.00 or more!

Spectra HL450 Laser Receiver

Category: SKU: HL450

$320.00

(0 reviews)

Description

Spectra HL450 Laser Receiver

Comes with bracket.

The HL450 Laser Receiver features a digital readout of elevation that provides a numeric display of ± 40 mm or ±1.5 inches. The readout is displayed on the large front and rear LCD’s and shows exactly how far the elevation is from on-grade. Accurate measurements can be made without moving the rod clamp, saving time, and increasing productivity.

No one needs a laser receiver that’s easily distracted on the job site.

The patented anti-strobe filter eliminates false readings from LED lights that are commonly found on the job site such as vehicle hazard warning strobe lights. And with the digital readout models which have the prefix HL, you do not even need to get the receiver to the on-grade position because it displays how far from on-grade you are – allowing you to work faster and more accurately. You can quickly estimate how much material you need to cut or fill.

Strengths of the HL450 include:

  • Reliable Accuracy

           All our models have different settings to suit your jobsite tolerances. The units of measure can be displayed in millimeters, centimeters, feet & inches and fractional inches.

  • Reception Length

          The longer the reception zone, the quicker you can acquire the laser beam allowing you to get your work done faster. When used in vertical, a longer pick up zone allows more control when doing tilt-up or curtain              walling.

  • Crazy Simple

          The laser receivers all include a display on the front and back for easy visual indication of detector status and grade information. The display shows proportional arrows to help you find the on-grade position                      rapidly. An adjustable audible tone indicates high, low and level. All basic functions are a single press away. Set your accuracy and loudness levels and get to work.

  • Operating Time

          Equipped with 2 AA batteries, all the models deliver long operating time to keep you working on the jobsite.

  • Tougher than Tough

      Designed to withstand a direct drop up to 10 feet* (3 meters) onto concrete meaning less downtime due to damage and service requirements. In addition, the IP67 waterproof housing protects the unit from the                  harsh environment it is used in. Drop it in a puddle or get concrete on it, just wash it off with a hose. It is that good we back it up with an over-the-counter exchange policy for all warranty claims within the defined            warranty period giving you peace of mind.

Working Radius

(Laser Dependent)

1 – 200 m (3 – 650 ft)

Laser Detection Height

102 mm (4“)

Numeric Readout Height

76 mm (3“)

Accuracy

(Dead-band)

Fine 1.0 mm 0.05 in 1/16 in

Medium 5.0 mm 0.20 in 1/4 in

Calibration 0.1 mm 0.01 in 1/64 in

Reception Angle

± 45° minimum

Battery Life

70+ hours

Environmental

Waterproof, Dust-proof to IP67

Detectable Spectrum

610 nm … 900 nm

Beeper Volumes

Loud = 100+ dBA

Low = 65 dBA

Power Supply

2 x 1.5 Volt “AA” batteries

Dimensions

168.0 x 76.0 x 36.0 mm (6.6” x 3.0” x 1.4”)

Operating Temperature

-20°C…+60°C (-4°F… +140°F)

Storage Temperature

-40°C…+70°C (-40°F…+158°F)

Automatic Shut-Off

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In